Mpm Ultraprint 2000 Download From Here
Mpm Ultraprint 2000 Free To Contact
Mpm Ultraprint 2000 Series Lasers Are

Mpm Ultraprint 2000 Free To Contact

Please feel free to contact us for customization according to your needs.

The systemcombinesour tunable lasers, polarization controller, power meter and software.

Our dedicated software optimizes the system for IL, WDL and PDL measurement for use in both RD and production environments.

Using real-time referencing, while simultaneously acquiring output power from the tunable laser and the transmitted optical power through the DUT, the system provides high accuracy in IL, WDL and PDL analysis using the Muller Matrix Method.

Accurate WDLPDL characteristics measurement - High power repeatability - High PDL repeatability 0.01 dB.

Mpm Ultraprint 2000 Series Lasers Are

The TSL series lasers are ideal for next generation components testing driven by innovations in Dense Wavelength Division Multiplexing (DWDM), passives and Wavelength Selective Switches (WSS).

The following graphs show the measurement data of a CWDM filter and notch filter, (such as an FBG) respectively.

During operation, the TSL will sweep continuously allowing each station to work independently and simultaneously with other stations.

In this way, the Multi-station measurement configuration can improve the efficiency of measurements for high-accuracy characterization and analysis.

All specifications applies with santec optical power meter MPM-210.

Temperature within 25C 5C 2: Temperature within 25C 1C 3: Does not include influence of connector.

The measurement condition is within wavelength resolution 5 pm, wavelength range 50 nm for 1 channel.

Measurement dynamic range per scan is up to 40 dB.

Mpm Ultraprint 2000 Download From Here

If you require an operation manual, please download from here.

If you require GUI software and drivers, please download from here.

When combined with our TSL-Series laser equipped with a power monitor output, the MPM-210 allows the user to complete real-time high precision IL measurements.

Multi-channel optical power from MPO or MTP connectors are measured.

Photo-detectors of Silicon type for 850 nm range and InGaAs type for 1260 - 1610 nm are available.

The detected photo-current is converted into a voltage output using a 16-bit multi-channel DAQ interface.

The highly integrated MPA-100 is available up to 80 channels with an excellent cost performance and small footprint.

The MPA-100 is useful for many 40 GbE 100 GbE applications, such as testing and monitoring of transceivers (SR4, SR10, LR4, and ER4) for data communications, broadband CATV, and telecommunications.

Tap-PD model (Eg.

Mpm Ultraprint 2000 Manual